The Radxa Cubie A5E is a compact single board computer built around an Allwinner A527 or industrial-grade T527 SoC, with a 40-pin GPIO header and a 69x56mm form factor. The closest Thinvent alternative is the Thinvent Micro 6 Pro Mini PC, an ARM Cortex A55 device with 4 GB RAM and 32 GB storage, which fits the same compact, Arm-based niche.
Radxa Cubie A5E vs Thinvent Micro 6 Pro Mini PC
| Radxa Cubie A5E | Thinvent Micro 6 Pro Mini PC, ARM Cortex A55 | |
|---|---|---|
| Processor | Allwinner A527 or T527 SoC | ARM Cortex A55 |
| Cores/Threads | Not stated | 4 cores |
| RAM | Not stated | 4 GB |
| Storage | NVMe SSD supported | 32 GB eMMC |
| Form Factor | Single board, 69x56mm, 40-pin GPIO | Mini PC |
| Max Frequency | Not stated | Up to 1.9 GHz |
| Cache | Not stated | 1 MB |
| HDMI | Not stated | 1 |
| Wireless | Not stated | Dual antenna, dual band Wi-Fi |
Key differences
-
The Thinvent Micro 6 Pro is supplied as a complete mini PC with Thinux embedded Linux, a 5V 2A adapter and dual antenna Wi-Fi, so it is ready to use out of the box.
-
The Radxa Cubie A5E is a bare single board design with a 40-pin GPIO header for hardware projects, a feature the Thinvent Micro 6 Pro does not list.
-
The Cubie A5E supports NVMe SSD storage and offers a choice between the A527 and industrial-grade T527 SoC, while the Thinvent Micro 6 Pro provides a fixed 32 GB eMMC.
-
The Thinvent Micro 6 Pro lists 1 MB cache, 1.9 GHz maximum frequency and 4 GB RAM, giving a documented specification for an embedded PC.
Which one should you choose?
Choose the Radxa Cubie A5E for maker projects, GPIO-driven prototyping and custom board designs where NVMe storage matters. Choose the Thinvent Micro 6 Pro Mini PC for a ready-to-deploy embedded ARM system with Wi-Fi, HDMI and Thinux pre-installed.
